Hirschmann BAT 11b, Руководство по управлению

Страница: 39 / 128

The Main Parameters
39
BAT 11b
Release 1.0 03/04
The Main Parameters
The following chapter introduces the main parameters of the
BAT 11b configuration and briefly illustrates them. That way,
you will gain an insight into the configuration options of the
BAT 11b.
Changing the Password
To prevent unauthorized access, you should change the pass-
word as soon as possible. You can find a detailed description
of the AP mode in Section
Configuration: Administration on
Page 3–80 , of the AC mode in Section Configuration: Admin-
istration on Page 4–106 .
Setting the Network Name
In contrast to LANs which have been configured via Ethernet, a
wireless LAN does not provide cabling to permit a permanent
connection between server and clients. This is why malfunc-
tions or access violations can occur in directly adjacent wire-
less networks.
In order to prevent this, there is a parameter comparable to a
domain name in each wireless network which clearly identi-
fies the network. Only clients where the network configuration
matches that of the BAT 11b can communicate in this WLAN.
For more information on the AP mode, refer to Section
Config-
uration: Wireless Interface on Page 3–70 , on the AC mode to
Section Configuration: Wireless Interface on Page 4–98 .