Hirschmann BAT 11b, Руководство по управлению

Страница: 100 / 128

Configuration: Wireless Interface
100
BAT 11b
Release 1.0 03/04
certain circumstances, however, it is necessary to do this
according to the procedure described below. The range of
a wireless network decreases with higher data rates and
increases with lower data rates.
Auto fallback 11, 5.5, 2, 1 Mbps
— Automatic fallback according to the quality of the
connection, starting with 11 Mbps, going down to 5.5
Mbps, 2 Mbps, and 1 Mbps. This is the most frequently
used setting.
Auto fallback 5.5, 2, 1 Mbps
— Automatic fallback according to the quality of the
connection, starting with 5.5 Mbps, going down to 2 Mbps
and 1 Mbps.
Auto fallback 2, 1 Mbps
— Automatic fallback according to the quality of the
connection, starting with 2 Mbps, going down to 1 Mbps.
Fixed 1 Mbps
— Sets the data rate to 1 Mbps. This setting can be used to
optimize the range for lower data rates.
Fixed 2 Mbps
— Sets the data rate to 2 Mbps.
Fixed 5.5 Mbps
— Sets the data rate to 5.5 Mbps.
Fixed 11 Mbps
— Sets the data rate to 11 Mbps. This setting makes sense
only if all wireless clients are operated at a short distance
and reach optimum quality of connection.
• Multicast Rate
This setting is only relevant if the BAT 11b-AC is to be
operated in ad-hoc mode. The multicast rate, i.e. the data