www.HiotH.com
network status indicator LED will go out.
(2) If the Smart Photoelectric Smoke Sensor has been included into the network, and want to
include into the new network, you must reset the device. Please long press the Reset button
for 10 seconds, LED will flash slowly for 2 seconds.
Fig.1
Network Indicator
Test/Mute Button
Please make sure that there is no real danger of fire when using mute function. Under known
and non-fire alarm condition, please do not block or by any other form to prohibit alarming.
Press the Test/Mute button to lower sensitivity and relieve alarm.
Fig.2
Reset button
Network indicator
