HIOS HP-1, Руководство по эксплуатации, Страница: 12 / 20

■
Use of the socket
In addition to the Fidaptor or threaded shaft, it is
possible to make one's own adapter to
fi t torsion
tool bits of different diameters into the socket for
measurement. Keep the following points in mind
when fashioning such an adapter.
20.0
-0.02
9.5
+0.035
6.0
6.0
2.7
6.0
6.0
4-M3.0 tap
5.0
9.0
0.5
10.0
45.0
゜
+0.04
20.0
-0.02
+0.04
+0.060
24.0 29.0
■ Battery charger
To charge batteries for the HIOS torque meter use
only the battery charger provided with the meter.
Always turn the power off when charging. The
fi rst
time will require 6 hours for a full charge.
Caution

Do not recharge the battery for longer than 6 hours.

Use only NiMH batteries, never any other kind,
even if obtained from HIOS Corporation.

Do not use the meter while charging the battery.

When the letters "LOBAT" appear in the display,
stop measurement and recharge the battery.
Cautions in making a socket adapter

Make sure that the adapter fi ts snugly into the
socket.

Make sure the adapter is strong enough that it
won't break during measurement.

Do not attempt to use an adapter that delivers
more than 10 kg of vertical torque.

Do not use this torque meter to measure impact
torque tools.

Take care to observe all other principles of
torque measurement.

Do not use the battery charger for any purpose
other than charging batteries for this instrument.

Do not place objects on top of the battery char-
ger's cord. Do not subject the cord to extreme
bending or tie it in knots.

Be sure the power to the instrument is off when
attaching or detaching the battery charger.

Do not attempt to remove the battery from the
instrument.
Danger!

Leaving the battery charger on for the maximum
recharge time of 6 hours could lead to overheat-
ing, damage to the instrument or fi res.
Details of the socket
±0.5
+0.05
-0
14mm in depth
6.35 ڧ
HP-10 • P-100
HP-1
Attention
The dimensions
indication of the socket
part is not to scale.
- 12 -