Hioki SS7081-50, Инструкция по эксплуатации, Страница: 49 / 71

46
(4)
Output voltage
Set and query the output voltage
Syntax
Command
[:SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
<0.0000E+00 to 5.0250E+00 (NRf)[,<1 to 12 (NR1)>]
[:SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
<0.0000E+00 to 5.0250E+00 (NRf), <0.0000E+00 to 5.0250E+00 (NRf),•••
<0.0000E+00 to 5.0250E+00 (NRf)
Query
[:SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude]?
[<1 to 12 (NR1)>]
Response <+0.0000E+00 to +5.0250E+00(NR3)>
Description
Sets or queries the output voltage for the channel specified using the last parameter.
In addition, separating the output voltage for 12 channels by commas sets an arbitrary
output voltage for all channels at the same time.
Command: If channel numbers are omitted, the same settings are made in all the
channels.
The minimum resolution of the voltage setting is 0.0001 V.
To output the voltage after an overcurrent error has occurred, execute this
command after executing
*
CLS or
*
RST .
Query: If parameters are omitted, the settings of all channels separated by commas are
returned.
Example
:VOLT 2.5,1
Sets channel 1 to 2.5 V.
:VOLT 3.5
Sets all 12 channels to 3.5 V.
:VOLT 3.5,3.4,3.5,3.4,3.4,3.6,3.5,3.4,3.6,3.5,3.5,3.6
Channel 1 is set to 3.5 V and channel 2 is set to 3.4 V. ••• (In the same manner, each
channel is set to a specified voltage.)
:VOLT? 1
+2.00
The channel 1 output voltage is set to 2.5 V.
HIOKI SS7081C961-00