Hioki PD3259-50, Инструкция по эксплуатации

Страница: 60 / 86

54
Wireless communications function
• The communications distance is about 10 m with a clear line of
sight. The communicable distance may vary greatly depending on
the presence of an obstruction (wall or metallic shielding object)
and the distance between the floor (ground) and instrument. To
ensure the stable communications, make sure that the radio wave
intensity is sufficient.
• GENNECT Cross is free of charge; however, the customer is
responsible for the cost to download the application software and
connect to the Internet when using the software.
• Some mobile communications devices cannot operate GENNECT
Cross.
• The Z3210 uses the 2.4 GHz band wireless technology.
When there is a device that uses the same frequency band
such as a wireless LAN (IEEE802.11.b/g/n) near your mobile
communications device, the communications may not be
established.
• When starting for the first time, GENNECT Cross will display the
connection setting screen.
• GENNECT Cross with the connection setting screen shown will
automatically register up to eight measuring instruments when
they are located nearby.
• Leave the instrument for 5 s to 30 s after power up until the
instrument is registered for connection. If no registration has
completed after one minute has elapsed, restart GENNECT
Cross and the instrument.
• When you turn on the instrument for the first time after
installing the Z3210, the instrument will start with the wireless
communications function enabled. The setting will be retained
even after power off.
HIOKI PD3259C961-00