Hioki PD3259-50 страница 31 Скачать руководство пользователя

Страница: 31 / 86

Installing/Replacing Batteries

CAUTION

Poor performance or damage from battery leakage could

result.

•

Do not mix old and fresh batteries, or different types of

batteries.

•

Pay attention to the polarity markings, “+” and “−,”

so that you do not insert the batteries the wrong way

around.

• Do not use batteries after their recommended expiry

dates.

• Do not leave a depleted battery inside the instrument.

•

Replace batteries only with the specified type of ones.

• Remove the batteries from the instrument if it is to be

stored for a long time.

• Handle and dispose of batteries in accordance with local

regulations.

• When the batteries are exhausted, the

symbols will blink.

In this case, the accuracy of any values are not guaranteed.

Thus, replace the batteries with fresh ones as soon as possible.

HIOKI PD3259C961-00

Содержание PD3259-50























































































Результаты поиска

Содержание PD3259-50

Отзывы:

Похожие инструкции для PD3259-50

Бренды по названию

Популярные бренды

Hioki PD3259-50, Инструкция по эксплуатации

Результаты поиска

Содержание PD3259-50

Отзывы:

Похожие инструкции для PD3259-50

Бренды по названию

Популярные бренды