Hioki LR8410, Руководство по измерениям

Страница: 27 / 44

23
Supported clamp sensor
Model
LR8513
Range
Clamp Sensor
Max. input current
Clamp Sensor
Max. input voltage
9669 1000 A 1000 A CAT III AC600 V
9695-02*
1
50 A 60 A CAT III AC300 V
CT6500 500 A 600 A CAT III AC600 V
9657-10 5 A 30 A *
4
CAT III AC300 V
9675 5 A 10 A * 4
CT9691-90 100 A 100 A
CAT III AC/DC 600 V CT9692-90 200 A 200 A
CT9693-90 2000 A 2000 A
CT7631* 2 100 A 100 A CAT IV AC/DC 600 V
CT7636*
2
200 A 600 A *
4
CAT IV AC/DC 600 V
CAT III AC/DC 1000 V
CT7642* 2 2000 A 2000 A
CT7731*
2
100 A 100 A CAT IV AC/DC 600 V
CT7736* 2 200 A 600 A * 4
CAT IV AC/DC 600 V
CAT III AC/DC 1000 V
CT7742*
2
2000 A 2000 A
CT9667-01 5000 A 10000 A * 4
CAT IV AC 600 V
CAT III AC 1000 V
CT9667-02 5000 A 10000 A *
4
CT9667-03 5000 A 10000 A * 4
CT7044* 2 5000 A
1000 A (600 A range)
10000 A (6000 A range) *
3
*
4
CT7045*
2
5000 A
1000 A (600 A range)
10000 A (6000 A range) * 3 * 4
CT7046* 2 5000 A
1000 A (600 A range)
10000 A (6000 A range) *
3
*
4
*1: The 9219 Connection Cord is required in order to connect a compatible clamp
sensor.
*2: The CM7290 or CM7291 Display Unit and L9095 Output Cord are required in
order to connect a compatible clamp sensor.
*3: Range changes are controlled from the CM7290/CM7291.
For details, refer to the instruction manual attached to each clamp sensor.
*4: When Model LR8513 is used in combination with these sensors, the instrument
cannot measure the maximum values of currents listed above. A maximum
measurable current with each of such sensors used is limited to the upper limit of
the measurement range you specified with Model LR8513.