Hioki LR8410, Руководство по измерениям

Страница: 16 / 44

12
Usage Notes
Handling of this instrument
CAUTION
Avoid any vibration or impact to prevent damage to the instrument during
transportation and handling. Be especially careful regarding the impact by
a fall.
This instrument may cause interference if used in residential areas. Such use must
be avoided unless the user takes special measures to reduce electromagnetic
emissions to prevent interference to the reception of radio and television broadcasts.
Handling of cords and cables
WARNING
Make sure to use the specified power cord when using the instrument.
Otherwise, a fire may be caused.
CAUTION
• Avoid stepping on or pinching the cables to prevent damage to the
cables. Do not bend or pull the cables.
• To prevent any wires from breaking, pull on the connector end, not the
cable, to disconnect the output connector.
• To prevent any wires from breaking, pull on the connector end, not the
cord, to disconnect the power cord from the outlet or the instrument.
• The cables become stiff below 0°C. If the cables are bent or pulled in this
condition, the cable insulation may be damaged or the wires may be cut.
• When using the instrument, make sure to use the connection cable specified by our
company. When any other cable is used, it may not be possible to perform accurate
measurement due to a contact failure, etc.
• When a measurement cable that is longer than 3 m is connected, measurement
may be affected by factors in the EMC environment, such as exogenous noise.
• Position the measurement cable away from the power line or ground cable.
• When the measurement cable is connected in parallel to other equipment,
measurement values may vary. If the measurement cable is to be connected in
parallel, make sure to check the operation before use.