Hioki FT4310, Инструкция по эксплуатации, Страница: 44 / 72

40
Making Measurements in BPD TEST Mode
Measuring Bypass Diode
CAUTION
To avoid electrical accidents, disconnect the solar
battery module from the commercial power circuit
before measuring.
Clusters with breakdown voltage 100 V or lower
cannot be judged correctly.
N ( - ) P ( + )
1
Release
2
1
Release the MEASURE key .
2
Set the rotary switch in BPD TEST.
Press to cancel the lock function.(p. 39)
N ( - ) P ( + )
Power conditioner,
Main switch
String
3
4
OFF
N(−)
P(+)
3
Connect the black test lead to N(−) of
the measurement object.
4
Connect the red test lead to P(+) of the
measurement object.
If the measurement object has an AC voltage
or its polarity is reversed, red and white flash
alternately on the backlight.