Hioki CM4371-50 Скачать руководство пользователя страница 18

Страница: 18 / 124

Operating Precautions

Operating Precautions

Observe the following precautionary information to ensure that the instrument can be used

safely and in a manner that allows it to perform as described in its specifications. Carefully

read the separate document entitled “Operating Precautions” before use. Use of the instrument

should conform not only to its specifications, but also to the specifications of all accessories,

options, and other equipment in use.

DANGER

Do not touch the section beyond the barrier during operation.

Failure to do so could cause the operator to experience an electric shock.

See “1.2 Part Names” (p. 18).

Do not measure any current in excess of the derating curve.

Doing so can cause overheating of the sensor, resulting in bodily injury, fire, or

damage to the instrument.

See "Frequency derating characteristics" (p. 66).

The maximum measurement current varies with the frequency, and the current

that can be measured continuously is limited. Operating the instrument at less

than this limitation is referred to as derating.

HIOKI CM4371C961-00

Содержание CM4371-50





























































































































Результаты поиска

Содержание CM4371-50

Отзывы:

Похожие инструкции для CM4371-50

Бренды по названию

Популярные бренды

Hioki CM4371-50, Инструкция по эксплуатации

Результаты поиска

Содержание CM4371-50

Отзывы:

Похожие инструкции для CM4371-50

Бренды по названию

Популярные бренды