manualshive.com logo in svg

Hioki Analog MO HiTESTER IR4011, Инструкция по эксплуатации, Страница: 76 / 104

Поделиться
Скачать
Hioki Analog MO HiTESTER IR4011 Скачать руководство пользователя страница 76

Chapter 2  Measurement Procedures

16

1.

Confirm that the power of the Insulation Resistance
Tester is turned off.

2.

Plug the test lead securely into the LINE terminal of the
Insulation Resistance Tester.

3.

Before Starting (Before using the test leads, be sure to
conduct the following safety checks.)
a. Short circuit the tips of the test leads.
b. Use the function selector to select Insulation Resistance.

c. Upon pressing the 

MEASURE

 key on the L9788-10,

the 

MEASURE

 key lights up in red and indicator nee-

dle points at 0 M

.

d. Press LIGHT key of the instrument to confirm that the

light at the tip of the L9788-10 comes on.

e. To prevent an electric shock accident, confirm that the

white portion (insulation layer) inside the cable is not
exposed. If a color inside the cable is exposed, do not
use the cable.

4.

Press the 

MEASURE

 key to start the measurement.

No

Yes

Содержание Analog MO HiTESTER IR4011









































































































Отзывы:

Нет отзывов