manualshive.com logo in svg

Hioki 9332, Инструкция по эксплуатации, Страница: 14 / 44

Поделиться
Скачать
Hioki 9332 Скачать руководство пользователя страница 14

10

_____________________________________________________________________________________________

Chapter 3 Setup and Operation of the 9332 WAVE COMMUNICATOR

______________________________________________________________________________________________

3.8 Upgrading the Memory HiCorder

NOTE

Be very careful not to disconnect the power supply during the upgrade. If the power
should fail during the upgrade process, it is necessary to send the unit for repair.

To use the 9332 WaveCommunicator requires the Memory HiCorder
software to have fax/modem support. First check the Memory HiCorder
software version, which appears on the title screen when the unit is powered
on.

Version for fax/modem support: 8807/8808 Version 2.00 or later

If the currently installed version does not have fax/modem support, an
upgrade is necessary.

Upgrading

1. Have ready a PC card (SRAM card or flash ATA card) which can be used

with the Memory HiCorder: check the Memory HiCorder manual for a list
of cards which are known to operate. Also make sure that the PC card can
be written on your computer. The PC card must have a free capacity of at
least 1.6 MB.

2. Insert the supplied CD-R into the CD-ROM drive.

3. Copy the upgrade files on the CD-R (file extension .PRG) to the PC card.

The upgrade files are in separate folders for each Memory HiCorder
model. For example, the 8807 folder includes upgrade files for models
8807/8808. Within the folder, for example, the file 8807V200.PRG is the
upgrade file for the 8807/8808 version 2.00. If the Memory HiCorder
version is already later than this, no upgrade is required; be careful not to
install an older version in error.

4. Get the Memory HiCorder ready. Make sure the unit has a reliable power

supply, if possible using an uninterruptible power supply. Note that if the
power should fail during the upgrade process, it is necessary to send the
unit for repair.

5. Carry out the upgrade. Insert the PC card in the Memory HiCorder, and

display the File screen. On the File screen, the upgrade file appears on the
PC card. Select the upgrade file, and execute Load. This starts the upgrade
process, which takes about three minutes. Leave the unit alone until the
upgrade process completes, whereupon it will restart automatically. This
completes the upgrade.

Содержание 9332













































Отзывы:

Нет отзывов