5
__________________________________________________
Chapter 2 Set Up
_____________________________________________
WARNING
･
To avoid electric shock when replacing the
batteries, disconnect the connection cable
before beginning. Also, after replacing the
batteries, always replace the cover and tighten
the screw before using the unit.
･
Do not mix old and new batteries, or different
types of batteries. Also, be careful to observe
battery polarity during installation. Otherwise,
poor performance or damage from battery
leakage could result.
･
Do not touch board when replacing batteries.
Touching board may result in damage.
･
Handle and dispose of batteries in accordance
with local regulations.
･
Use only LR03 Alkaline batteries. Using
manganese batteries may not result in accurate
measurements or proper communication with
the Communication Base.
Chapter 2
Set Up
2.1 Replacing the Battery
