Hioki 3511-50 Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 140

Hioki 3511-50 Скачать руководство пользователя страница 72

60

________________________________________________________________________________________________________________

5.6 External Interference

________________________________________________________________________________________________________________

5.6.2 Countermeasures Against Noise from the Test Cables

Anti-interference ferrite core

(3) Fitting an anti-interference ferrite core on the power cord

Pass the power cord through a commercially available anti-interference
ferrite core, and fix it on the power cord as close as possible to the AC
power inlet of the 3511-50 unit, so as to suppress noise from the power
supply line. Further benefit can often be obtained by fitting another anti-
interference ferrite core on to the power cord at its other end, as close as
possible to the plug which connects to the power supply outlet.
Moreover, if the internal diameter of the ferrite core allows, winding the
power cord several times around the ferrite core may further reduce the
amount of noise. Various types of such anti-interference ferrite cores or
ferrite beads are readily available in the market from specialist
manufacturers.

If interference is producing noise in the test cables, its influence can be
moderated by the following countermeasure.

Fitting an anti-interference ferrite core on the test cables

Pass the test cables through a commercially available anti-interference ferrite
core, and fix it close to the test terminals, so as to suppress noise from the
test cables.
Moreover, if the internal diameter of the ferrite core allows, winding the test
cables several times around the ferrite core (as with the power cord as
described above) may further reduce the amount of noise.

«
...
70
71
72
73
74
...
»

Содержание 3511-50













































































































































Отзывы:

Нет отзывов