Hioki 3511-50, Инструкция по эксплуатации, Страница: 4 / 140

3.8 Short Circuit Compensation 23
3.8.1 Performing Short Circuit Compensation 23
3.8.2 Short Circuit Compensation Error 25
3.8.3 Canceling Short Circuit Compensation 25
3.9 Setting the Trigger Signal 26
3.9.1 Setting the Trigger Mode 26
Chapter 4 Other Functions 27
4.1 Comparator Function 27
4.1.1 Operation Sequence 28
4.1.2 Setting the Upper and Lower Limits 28
4.1.3 Comparator Test Mode 30
4.2 Panel Save Function 31
4.2.1 Setting Panel Save 31
4.2.2 Aborting Panel Save 31
4.3 Panel Load Function 32
4.3.1 Setting Panel Load 32
4.3.2 Aborting Panel Load 32
4.4 Key Lock Function 33
4.4.1 Executing the Key Lock Function 33
4.4.2 Cancelling the Key Lock Function 33
4.5 Various Settings Made After Switching on Power 34
4.5.1 Setting Screen Flow After Power ON 34
4.5.2 Setting the Interface 35
4.5.3 Setting Beep 36
4.5.4 Executing System Reboot 37
4.6 Remote Function 38
4.6.1 Remote Mode 38
4.6.2 Cancelling the Remote Mode 38
4.7 The Residual Charge Protection Function 39
Chapter 5 Applications 41
5.1 Testing Using EXT I/O 41
5.1.1 The EXT I/O Connector 41
5.1.2 Pinouts for the EXT I/O Connector 42
5.1.3 Signal Lines for the EXT I/O Connector 43
5.1.4 Circuit Construction and Connections for the EXT I/O
Connector 45
5.1.5 Electrical Characteristics of the Output Signals 46
5.1.6 I/O Signal Timing 47
5.1.7 Time Taken for Testing 48