Hioki 3286-20, Инструкция по эксплуатации

Страница: 63 / 78

46
―――――――――――――――――――――――――――
Chapter 3 Specifications
――――――――――――――――――――――――
Auto power-off Automatic shutdown after 10.5 1
minutes. Beep tone warning before the
shutdown. Extending and disabling
possible.
Battery low voltage
power-off When the battery voltage falls below a
certain level, the function shuts down the
instrument to prevent malfunctions.
Beep tone ON/OFF

Display LCD panel
Digital counter 6000 counts max.
Over-range display " O.L. "
Data hold annunciator HOLD
Auto power-off
annunciator APS
Battery low warning
goes on (during which time accuracy
cannot be guaranteed).
Battery low voltage
power-off bAtt Lo
(7 segments used) Power turned off after
display.
Display update rate Digital counter
NORMAL
1s 50 ms (approx. 1 time/second)
SLOW
3s 0.15 s (approx. 1 time/3 seconds)
HARM meas.
2s 0.1s (approx. 1 time/2 seconds)
Display response time The range is fixed, 0% to 90%, 3.5 s
max.
Phase measurement, 4.0 s max.
Range switching Auto range, manual (fixed) range
(selectable).
The power range depends on current and
voltage ranges.
Circuit dynamic
characteristics
(crest factor)
2.5 max. (1.7 for 1000 A range and 600
V range)
Withstand voltage Clamp sensor - Chassis, clamp sensor -
circuit: 7060 Vrms AC for 1 minute.