Hinkley 930008, Инструкция по эксплуатации, Страница: 2 / 12

SAFETY RULES
UNPACKING YOUR LIGHT KIT
02
|
hinkley.com
"CAUTION-RISK OF FIRE"
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
WARNING! RISK OF ELECTRIC SHOCK
All electrical connections must be made in accordance with local codes, ordinances, or national codes. If you are unfamiliar with installing
electrical wiring, secure the services of a qualified electrician. Before starting this installation, disconnect the power by turning off the circuit
breaker at your main panel or removing the fuse at the fuse block. Turning the power off using the ceiling fan switch (speed control on/off)
is not sufficient to prevent electrical shock.
NOTE:
The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations
that may occur. It must be understood that common sense, caution and care are factors which cannot be built into any product. These
factors must be supplied by the person (s) caring for and operating the unit.
UNPACK YOUR LIGHT KIT AND CHECK THE CONTENTS.
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing. Remove all
parts and hardware.
• Examine all parts. You should have the following:
PACKAGE CONTENTS
1 Light kit
2
Glass shade
9W LED bulb
Extra thumbscrew
3
4
5
Nut, Wire Nuts (2), Spring Washer
Pull chain and fob
2 1
3
4 5