Hinkley 52" VENTUS, Инструкция по эксплуатации

Страница: 14 / 66

INSTALLING THE LED ASSEMBLY AND GLASS SHADE
1
2
3
4
5
5
NOTE:
Be sure the power is off before installing.
Remove one of the three screws on the mounting plate
located on the fan motor. Loosen the other 2 screws. (Do not
remove) (Fig. 2)
While holding the LED assembly under your fan, make the
polarized plug connections: (Fig. 2)
- Red to white
- Black to black
Tuck connections neatly into mounting plate. Place the key
holes on the LED assembly over the 2 screws previously
loosened, turn the LED assembly until it locks in place at the
narrow section of the key holes. Secure by tightening the 2
screws previously loosened and the one previously removed.
Raise the glass shade against the LED assembly and turn
clockwise until snug, DO NOT OVERTIGHTEN.
Restore power and your LED assembly is ready for operation.
12
|
hinkley.com
Fig. 2
Screws
Light
assembly
Wire connectors