manualshive.com logo in svg

HIMA HIMax, Системное руководство

Поделиться
Скачать
HIMA HIMax Скачать руководство пользователя страница 8

1 Introduction 

HIMax System 

HI 801 001 E Rev. 4.01 

Page 8 of 122 

1.3 Formatting 

Conventions 

To ensure improved readability and comprehensibility, the following fonts are used in this 
document: 

Bold: 

 

To highlight important parts 
Names of buttons, menu functions and tabs that can be clicked and 
used in SILworX. 

Italics:

 

System parameter and variables 

Courier 

Literal user inputs 

RUN 

Operating state are designated by capitals 

Chapter 1.2.3 

Cross references are hyperlinks even though they are not particu-
larly marked. When the cursor hovers over a hyperlink, it changes its 
shape. Click the hyperlink to jump to the corresponding position. 

Safety notes and operating tips are particularly marked. 

1.3.1 Safety 

Notes 

The safety notes are represented as described below.  
These notes must absolutely be observed to reduce the risk to a minimum. The content is 
structured as follows: 

ƒ

  Signal word: danger, warning, caution, notice 

ƒ

  Type and source of danger 

ƒ

  Consequences arising from the danger 

ƒ

 Danger 

prevention 

The signal words have the following meanings: 

ƒ

  Danger indicates hazardous situation which, if not avoided, will result in death or serious 

injury. 

ƒ

  Warning indicates hazardous situation which, if not avoided, could result in death or se-

rious injury. 

ƒ

  Warning indicates hazardous situation which, if not avoided, could result in minor or 

modest injury. 

ƒ

  Notice indicates a hazardous situation which, if not avoided, could result in property 

damage. 

 

NOTICE 

 

Type and source of damage! 
Damage prevention 

 

 

 

 

 SIGNAL WORD

 

 

Type and source of danger! 
Consequences arising from the danger 
Danger prevention 

 

 

Содержание HIMax



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды