HIMA HIMax, Системное руководство

Страница: 36 / 122

3 Product Description HIMax System
HI 801 001 E Rev. 4.01 Page 36 of 122
State Description The state is adopted
LOCKED Emergency state: The processor
module is reset to the factory set-
tings (SRS, network settings,
etc.). Connecting the operating voltage to the
processor module while the mode switch is
set to Init.
Stopping the processor module using SIL-
worX
Connecting the operating voltage
ƒ Autostart is disabled in the project
configuration or
ƒ Mode switch is set to Stop and the
processor module starts by itself.
From the LOCKED state: Setting the mode
switch to Stop if one single processor mod-
ule exists.
STOP/VALID
CONFIGURATION Processor module stopped: A
valid configuration is available in
the memory.
A fault occurred
Loading with error
STOP/INVALID
CONFIGURATION Processor module stopped: No
valid configuration is available in
the memory.
From the LOCKED state: Setting the mode
switch to Stop if one single processor mod-
ule exists.
STOP/OS_DOWNLO
AD Processor module stopped: The
operating system is loaded in the
non-volatile memory. Loading the operating system using SIL-
worX
Using a SILworX command to enter the
STOP/VALID CONFIGURATION state
Connecting the operating voltage under the
following conditions:
ƒ A valid project configuration is loaded
ƒ Autostart is enabled in the project
configuration
ƒ The mode switch is not set to Init
ƒ The mode switch is set to Run if the
processor module starts by itself
RUN The user program is running.
From the LOCKED state: Setting the mode
switch from Init to Stop or Run if an addi-
tional processor module is operating in the
RUN.
RUN/UP STOP
The user program is not running.
This state is used for testing the
inputs/outputs and communica-
tion. From the STOP/VALID CONFIGURATION
state using a SILworX command
Table 11: Operating System States, Adopting the States