X-DI 16 01
3 Product Description
HI 801 057 E Rev. 4.00
Page 25 of 54
3.7 System
Cable
The system cables are used to wire the connector boards with the field zone via the field
termination assembly or inline terminals. The following type of cable is used for the system
cables:
General
Cable
LIYY 5 x 0.5 mm
2
Wire
Finely stranded
Average outer diameter (d)
approx. 6.3 mm
Minimum bending radius
Fixed laying
Flexible application
4 x d
7.5 x d
Combustion behavior
Flame resistant and self-extinguishing in
accordance with IEC 60332-1-2, -2-2
Length 5…30
m
Number coding
See Table 13 for details on the pin
assignment.
Table 14: Cable Data
System Cable Set X-CA 004 01
The X-CA 004 01 system cable set is delivered with 8 cables which are required for
connector boards X-CB 007 03 and X-CB 007 04. The cables are used to connect the
connector boards to the field zone via the X-FTA 004 field termination assembly. Cable
plugs with spring terminals are already mounted on the pre-assembled cables.
Cable Plugs
Cable LIYY 5 x 0.5 mm
2
Figure 7:
Cable from the System Cable Set X-CA 004 01
System Cable X-CA 004 02
The X-CA 004 01 system cable set is delivered with 8 cables which are required for
connector boards X-CB 007 03 and X-CB 007 04. The cables are used to connect the
connector boards to the field zone. Cable plugs with spring terminals are already mounted
on the pre-assembled cables. The ends of the cables are opened on the field side and can
be connected to the appropriate terminal. For more information about the mounting refer to
chapter 4.1.
Cable Plugs
Cable LIYY 5 x 0,5 mm
2
Connection to Field Zone (Cable
with Open Ends)
Figure 8:
Cable from the X-CA 004 02 System Cable Set
