Obligation signs
Wear eye
protection
Wear a hard
hat
Wear ear
protection
Wear
protective
gloves
Wear
breathing
protection
Symbols
Volts
Direct
current
Strokes per
minute
Read the
operating
instructions
before use
Return waste
material for
recycling.
Stroke rate
Unlocked
Locked
Location of identification data on the power tool
The type designation and serial number can be found
on the type identification plate on the machine or tool.
Make a note of this data in your operating instructions
and always refer to it when making an enquiry to your
Hilti representative or service department.
Type:
Generation: 01
Serial no.:
2 Description
2.1 Use of the product as directed
The WSR 18-A is a cordless reciprocating saw for professional use. It is designed to be used for cutting wood,
wood-like materials, metals and plastics. The power tool is suitable for use by right or left-handed persons. An
ergonomically designed grip with synthetic rubber covering provides a comfortable, secure hold and makes the power
tool less tiring to use.
The power tool is designed for two-handed operation.
Possible fields of use: Rescue services, public authorities, agriculture and forestry, construction sites, workshops,
renovation, conversion and new construction, metal construction, timber construction, plumbing, heating and air
conditioning system installation in which the types of cutting work listed above are carried out.
Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
Do not use the power tool to cut pipes which still contain liquids.
Do not saw into unknown materials.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The power
tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not
as directed.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
en
2
Printed: 08.07.2013 | Doc-Nr: PUB / 5071341 / 000 / 02
