Hilti ST 1800-A18, Руководство по эксплуатации

Страница: 13 / 16

7
Removing screws
Note
Remove the depth gauge or screw guide, if fitted. Set the forward / reverse switch to the
“Reverse” position.
Removing the battery 13
6 Care of the metal construction screwdriver
WARNING
Electrical hazards! Improper repairs to electrical parts may lead to serious injuries.
▶
Electrical parts may be repaired only by trained electrical specialists.
▶
Keep the product, especially its grip surfaces, clean and free from oil and grease. Do not use
cleaning agents containing silicone.
▶
Never operate the product when the air vents are blocked. Clean the air vents carefully using a dry brush.
Do not allow foreign objects to enter the interior of the product.
▶
Clean the outside of the product at regular intervals with a slightly damp cloth. Do not use a spray, steam
pressure cleaning equipment or running water for cleaning.
▶
Clean the connection end and the chuck at regular intervals.
6.1 Care of the lithium­ion batteries
Note
Keep the battery clean and free from oil and grease.
Clean the outer surfaces with a slightly damp cloth at regular intervals. Do not use cleaning agents
containing silicone.
To achieve maximum battery life, stop drawing power from the battery as soon as a significant drop
in the performance of the power tool is noticed.
Battery discharge is stopped automatically before the battery cells suffer damage.
6.2 Transport and storage
Transport
CAUTION
Inadvertent starting during transport. Uncontrolled starting during transport may occur if the battery
is fitted, thereby resulting in damage to the tool.
▶
Always remove the battery before transporting the tool.
• Remove the battery.
• Transport the tool and battery individually packaged.
• Never transport batteries in bulk form (loose, unprotected).
• Check tools and batteries for damage before use after long periods of transport.
Storage
CAUTION
Inadvertent damage caused by defective battery. A leaking battery may damage the tool.
▶
Always remove the battery before storing the tool.
• Store the tool and battery in a place that is as cool and dry as possible.
• Never store batteries in direct sunlight, on heating units or behind a window pane.
• Store the tool and batteries in a place where they cannot be accessed by children or unauthorized
persons.
• Check the tool and batteries for damage before use after long periods of storage.
Printed: 15.10.2015 | Doc-Nr: PUB / 5070714 / 000 / 04