Hilti SF151-A, Руководство по эксплуатации

Страница: 21 / 223

Power tool SF 151-A SFH 151-A
Speed in 2nd gear 0…1,455/min 0…1,380/min
Speed in 3rd gear
0…2,000/min
Torque with tool set to drilling
symbol (soft/flexible joint) Max. 33 Nm Max. 33 Nm
Torque (driving screw in hard
material) set to drilling symbol Max. 70 Nm Max. 70 Nm
Torque range (15 settings) 2…12 Nm 2…12 Nm
Hammering speed 36,000/min
Hammer drilling in brick and
masonry (max. length 80 mm)
š
1.5…6 mm
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working
period. An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
Noise and vibration information (measured in accordance with EN 60745):
Typical A-weighted sound power level for the
SF 151-A
88 dB (A)
Typical A-weighted sound power level for the
SFH 151-A 104 dB (A)
Typical A-weighted emission sound pressure level
for the SF 151-A 77 dB (A)
Typical A-weighted emission sound pressure level
for the SFH 151-A. 93 dB (A)
Additional information in accordance with EN 60745
Triaxial vibration values (vibration vector sum) measured in accordance with EN 60745 ತ 2 ತ 2
Screwdriving without impact action, a
h
< 2.5 m/s t
Uncertainty (K) 1.5 m/s t
Additional information in accordance with EN 60745
Triaxial vibration values (vibration vector sum) measured in accordance with EN 60745 ತ 2 ತ 1
Hammer drilling in concrete, a
h,ID
11.8 m/s t
Drilling in metal, a
h,D
< 2.5 m/s t
Uncertainty (K) for triaxial vibration measurements
1.5 m/s t
Battery SFB 150 SFB 155
Rated voltage 15.6 V 15.6 V
Capacity
2 Ah 3 Ah
e n
18
Printed: 07.07.2013 | Doc-Nr: PUB / 5070659 / 000 / 00