Hilti PD 20, Руководство по эксплуатации

Страница: 16 / 25

30 31
Continuous measurement (tracking)
4. Working with the PD 20
Measuring distances, continued
Press the “measure” button once
(long press to activate tracking
mode).
The following is displayed:
Switch on the tool.
Move the tool and
read each new
distance, as it is
measured, at each
new position.
Tracking mode can be cancelled by
pressing any button.
1.010m
Measuring using the spike
4. Working with the PD 20
Measuring distances, continued
The spike should be folded out when measuring
the diagonals of a room or when taking
measurements from corners where access is
difficult.
The extended reference point is taken into
account and the tool automatically corrects the
measured distance by the corresponding value.
The measuring procedure is carried out as
described previously.
17.863 m