Hilti NPR 032 PE-A22, Руководство по эксплуатации

Страница: 15 / 22

English 11
5.5.3 Position/stroke table
Pos. Stroke Application
1 40 mm 12.0 mm …66.7 mm
(with NPR PS M & NPR PR M)
16.0 mm …75.0 mm
(with NPR PS G & NPR PR G)
12.0 mm …108.0 mm
(with NPR PS V & NPR PR V)
12.0 mm …63.0 mm
(with NPR PS TH & NPR PR TH)
12.0 mm …110.0 mm
(with NPR PS U & NPR PR U)
2 80 mm 76.1 mm …108.0 mm
(with NPR PR M)
3 100 mm Industrial application
5.6 Fitting the crimping / pressing jaws
WARNING
Risk of injury! Unintentional starting.
▶
Remove the battery before fitting, changing or removing the crimping / pressing jaws.
Never operate the crimping / pressing tool without crimping / pressing jaws in place.
To ensure correct crimping and reliable and safe operation, use only the crimping jaws approved by
the system provider and/or machine manufacturer.
1. Remove the battery and select the most suitable crimping / pressing jaws.
2. Press the locking pins.
3. Rotate the locking pins counterclockwise as far as they will go.
4. Pull out the locking pins.
5. Fit the crimping / pressing jaws.
6. Push the locking pins in until they engage.
7. Rotate the crimping / pressing head to the desired working position.
The crimping / pressing head can be rotated much more easily when not under pressure.
Printed: 29.10.2018 | Doc-Nr: PUB / 5436899 / 000 / 01