Hilti NCT IS 053-A22, Оригинальная инструкция по эксплуатации

Страница: 13 / 44

*2188461*
2188461 English 9
▶ Prior to each use and before and after prolonged storage, check the product and the batteries for
damage.
8 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by
yourself, please contact
Hilti Service.
8.1 The cutting tool is not in working order.
Malfunction Possible cause Action to be taken
The LEDs on the battery indi-
cate nothing. The battery is not correctly in-
serted. ▶ Push the battery in until it
engages with a double click.
The battery is discharged. ▶ Change the battery and charge
the empty battery.
The battery is too hot or too cold. ▶ Allow the battery to cool
down or to warm up to room
temperature.
1 LED on the battery blinks. The battery is discharged. ▶ Change the battery and charge
the empty battery.
The battery is too hot or too cold. ▶ Allow the battery to cool
down or to warm up to room
temperature.
4 LEDs on the battery blink. Product momentarily overloaded. ▶ Allow the product to cool down.
Red LED => lights continu-
ously and a warning tone is
emitted. Technical problem. ▶ Incorrect operation is possible!
Contact
Hilti Service.
Red LED => blinks at short
intervals and a warning tone
is emitted. The state of charge of the battery
is too low to allow a complete op-
erating cycle. ▶ Change the battery and charge
the empty battery.
Red LED => lights briefly and
no warning tone is emitted. Product overheated. ▶ Allow the product to cool down.
8.2 The cutting tool is in working order.
Trouble or fault Possible cause Action to be taken
The battery runs down more
quickly than usual. Very low ambient temperature. ▶ Allow the battery to warm up
slowly to room temperature.
The battery does not engage
with an audible double click. The retaining lugs on the battery
are dirty. ▶ Clean the retaining lugs and refit
the battery.
Red LED => lights continu-
ously and a warning tone is
emitted. Technical problem. ▶ Incorrect operation is possible!
Contact
Hilti Service.
9 Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping gases or liquids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store , or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to
Hilti for recycling. Ask Hilti Service or your Hilti sales representative for further information.