![background image](http://html.mh-extra.com/html/hilti/gx-3/gx-3_original-operating-instructions_2134967022.webp)
18
&
Cooling air slots
(
Belt hook
)
Trigger
+
Grip
§
Nail pusher
/
Magazine lockbutton
:
Support leg
∙
Magazine
$
Type identification plate
£
Gas can status indicator
|
GAS
button
¡
Gas can compartment
Q
Gas can compartment cover
3.2 Intended use
The product described is a gas-actuated fastening tool (“fastening tool”). It is designed to drive suitable
fasteners into concrete, steel, concrete-block masonry, sand-lime block, rendered masonry and other
materials suitable for use of the direct fastening technique.
Further details can be found in the
Fastening Technology Manual
copies of which can be obtained from a
Hilti
Service Center or from the following address:
Internet: http://www.hilti.com
The fastening tool is designed for professional use in drywall construction, general construction work and in
various installation trades.
The fastening tool, gas can and fasteners form a technical unit. This means that trouble-free fastening with
this fastening tool can be ensured only when it is used together with the fasteners and gas cans specially
manufactured for it by
Hilti
. The fastening and application recommendations made by
Hilti
apply only when
this condition is observed.
This fastening tool may be used only hand held or in conjunction with the special “pole tool” extension
(accessory).
3.3 Items supplied
Gas-actuated setting tool with fastener guide, toolbox, operating instructions.
You can find other system products approved for your product at your local
Hilti
Center or online at:
www.hilti.com
3.4 Fastener guide
The fastener guide holds the studs or, respectively, guides the nails and, when the tool is fired, thus directs the
fasteners into the supporting material at the desired position. Application-specific fastener guides (IF or ME)
are available for the
GX 3
and
GX 3-ME
fastening tools (see type identification plate for exact designation).
3.5 Fasteners
Two types of fastener can be driven by the fastening tool: nails and threaded studs. Additional fastening
components, which can be inserted in the fastener guide, are also available for various applications.
3.6 Guidelines for use on concrete and steel
Information about national regulations, and the
Fastening Technology Manual
containing further informa-
tion, are available from the
Hilti
marketing organization responsible for your location.
The
Fastening Technology Manual
can also be obtained from:
Internet: http://www.hilti.com
3.7 Slider for fastener driving depth adjustment and for releasing the fastener guide
The slider can be used to reduce the depth to which the fastener is driven. In the
EJECT
position, it releases
the fastener guide for removal.
Status
Meaning
+
• Standard fastener driving depth
• Reduced fastener driving depth
EJECT
• Fastener guide release
3.8 RESET button
After driving a fastener, under certain circumstances, the fastener guide may not return to its outset position.
This is caused by the piston being incorrectly positioned. The incorrect piston position can be remedied by
pressing the
RESET
button.
Printed: 29.01.2016 | Doc-Nr: PUB / 5261568 / 000 / 00
Содержание GX 3
Страница 2: ...1 Printed 29 01 2016 Doc Nr PUB 5261568 000 00 ...
Страница 4: ...Printed 29 01 2016 Doc Nr PUB 5261568 000 00 ...
Страница 169: ...Printed 29 01 2016 Doc Nr PUB 5261568 000 00 ...