Hilti DSW 1510-CA, Руководство пользователя, Страница: 30 / 48

26 English 2238935
*2238935*
7.3 Diamond wire
7.3.1 Fitting wire connectors and connection of diamond wire
Read and follow the instructions given in the operating instructions of the diamond
wire and the connectors.
7.3.2 Diamond-wire path and cutting direction
The illustration shows the path of the diamond wire through the structure and the drive
unit in the cutting direction.
Use the guide pulleys to control the diamond wire and restrict the free lengths of
the diamond wire to a minimum.
The length and height of the wire arc influence the rate of progress and the service
life of the diamond wire.
Note the cutting-direction indicator on the diamond wire. You can also identify the
cutting direction by the conical shape of the cutting beads. The small-diameter end
of the beads always faces in the cutting direction.
7.3.3 Laying diamond wire on to pulleys
1. Before entering the danger zone, always press the EMERGENCY STOP button or the
ON/OFF switch on the remote control unit.
2. Feed the diamond wire through the hollow axle of the pulley stand (slack-wire side)
(1) .
3. Feed the diamond wire through the first through-hole drilled in the structure (2) .