Hilti DSW 1510-CA, Руководство пользователя

Страница: 22 / 48

18 English 2238935
*2238935*
Arrange the cutting sequence so that the diamond wire cannot become trapped by parts
that are cut away.
▶
Plan the sequence of operations before setting up the system.
▶
Plan the cooling water supply system and water disposal system.
▶
Observe the safety instructions.
▶
Define the danger zone. Cordon off the danger zone with barriers and adopt
appropriate safety measures.
▶
Plan how the section to be cut away is to be secured, removed and transported away
and prepare measures for these steps.
▶
Mark the cutting lines. If the section to be removed is large, cut it away in smaller
parts if necessary.
6.1.3 Safety aspects to be clarified prior to installation
▶
Is the cutting area free from hazardous pipes or cables (gas, water, electricity, etc.)?
▶
Have the effects of the cutting work on the stability of the structure been clarified and
are all supports capable of taking up the resulting loads?
▶
Can the possibility of hazards or damage as a result of the cooling water used be ruled
out?
▶
Can the work zone be secured to such an extent that persons cannot be injured or
property damaged by falling or flying parts?
▶
Can the parts of the structure cut away be removed safely in a controlled operation
and disposed of?
▶
Do the electricity supply and the water supply available for use meet the specified
requirements?
▶
Is the required equipment in the correct specification available for use?
▶
Has the work to be carried out been approved in full by site management?
6.2 Examples of wire guidance
The following examples illustrate the most common applications.
Adhere to the examples shown in these operating instructions when positioning the
wire guidance system and the pulley stands. Consult a wire sawing specialist about
other wire guidance configurations.
For the sake of clarity, the wire guidance systems in the following examples are shown
without guards fitted.
Examples of applications:
Straight cut, good for
longevity of diamond wires