Hilti DS TS 5-SE, Руководство по эксплуатации

Страница: 3 / 40

3
Congratulations!
In purchasing the Hilti DS TS 5-SE electric wall saw you have acquired a quality product that provides the highest
level of performance, safety and reliability. Manufactured to comply with uncompromising quality assurance
requirements, it has been designed to ensure a long service life.
Featuring one-man operation, high mobility, a quick and easy installation principle as well as automatically con-
trolled advance independent of the material being cut, this saw offers advantages that make it a pleasure to use
and guarantee high cost efficiency when cutting concrete and masonry, i.e. walls, floors and ceilings with a thick-
ness of up to 28/30 cm.
These operating instructions are intended for the use of tradesmen in construction, subsequently referred as “the
operator”. Before operating the
DS TS 5-SE wall saw, the operator must read and understand the operating instruc-
tions and receive training from a Hilti representative. These are the prerequisites for efficient, safe operation of the
system.
We would like to wish you every success in your work and thank you for placing your confidence in Hilti products.
Safety precautions 1 General warnings 4
2 Safety precautions when setting up, fastening and
operating the DS TS 5-SE electric wall saw 4
3 General safety precautions 5
4 Electrical safety precautions 6
Technical data and description 1 Description of the electric wall saw 8
2 Nominal technical data 8
3 Noise, EC conformity, rating plate 9
4 Dimensions and weights 10
5 Operating controls 11
6 Parts of the electric wall saw 14
Operation 1 Preparations at the workplace 16
2 Setting up the electric wall saw 17
3 Diamond saw blades 24
4 Checks, operation and the sawing procedure 27
5 Dismantling the saw system 30
6 Tips and tricks 31
Maintenance 1 Accessories / tool set 33
2 Care and maintenance 34
3 Troubleshooting 35
4 Repairs 37
Various 1 Recycling 38
2 Warranty 39
Contents
ORIGINAL OPERATING INSTRUCTIONS
Electric wall saw
DS TS 5-SE 3
×
200 V / DS TS 5-SE 3
×
400 V