Hilti DG150, Руководство по эксплуатации

Страница: 19 / 124

16
5. Safety instructions
5.1 General power tool safety warnings
WARNING! Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool.
5.1.1 Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gas-
es or dust.
Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while operat-
ing a power tool.
Distractions can cause you to lose
control.
5.1.2 Electrical safety
a) Power tool plugs must match the outlet. Never mod-
ify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified
plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrig-
erators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts.
Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use.
Use of a cord suit-
able for outdoor use reduces the risk of electric shock
f) If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protect-
ed supply.
Use of an RCD reduces the risk of electric
shock.
Dimensions (l
×
w
×
h) 46
×
25
×
23 cm 27
×
22
×
15 cm
Electrical protection class Protection class II
Z
(double insulated)
- NOTE-
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary asses-
sment of exposure. The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working peri-
od. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Noise and vibration information (measured in accordance with EN 60745):
Typical A-weighted sound pressure level 88 dB (A)
Typical A-weighted sound power level 99 dB (A)
Uncertainty 3 dB
Triaxial vibration values 5,8 m/s 2
Uncertainty (K) 1,5 m/s 2
Other significant characteristics of the appliance
Time to stop after switching off
≤
2 sec.
Thermal overload protection
Restart safety interlock
Right of technical changes reserved
Printed: 08.07.2013 | Doc-Nr: PUB / 5069653 / 000 / 01