20
English
Electrical safety
▶
Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the power tool may give you an electric shock if you damage an electric cable
accidentally.
Using and handling power tools with care
▶
Do not use cutting discs for grinding.
▶
Tighten the accessory tool and flange securely. If the accessory tool and flange are not tightened
securely, the accessory tool may work loose from the spindle due to the braking effect of the motor after
switching off.
▶
Comply with the manufacturer's instructions for handling and storing grinding discs.
3 Description
3.1 Product overview
1
@
Arbor lockbutton
;
Steadying rib for set-down
=
On/off switch
%
Speed adjustment thumbwheel
&
Side handle
(
Pin wrench
)
Clamping nut
+
Abrasive cutting disc/abrasive grinding disc
§
Clamping flange with O-ring
/
Guard
:
Clamping lever
·
Adjusting screw
$
Arbor
£
Keyed locating lug
|
Threaded socket for side handle
3.2 Intended use
The product described is a hand-held electric angle grinder. It is designed for cutting, grinding and sanding
metal and mineral materials without use of water.
The tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its rating plate.
• The power tool may be used for cutting, slitting and grinding mineral materials only when equipped with
the corresponding guard and front cover.
• A dust removal hood together with a suitable
Hilti
vacuum cleaner must be used for working on mineral
materials such as concrete or stone.
3.3 Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, wrench, operating
instructions.
Other system products approved for use with this product can be found at your local
Hilti Store
or online at:
www.hilti.group
| USA:
www.hilti.com
3.4 Speed preselection
This angle grinder has adjustable speed preselection with 6 speeds:
• AG 125 7SE: 6000 - 11500 rpm
• AG 125 8SE: 3500 - 11500 rpm
3.5 Restart interlock
The power tool does not restart by itself when the on/off switch is locked in the on-position and the power
returns after an interruption in the electric supply. The on/off switch must first be released and then pressed
again to restart.
3.6 Front cover for the disc guard
2
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications,
use the standard guard with front cover.
3.7 DG-EX 115/4,5" dust hood for grinding (accessory)
3
The grinding system is suitable only for occasional use with diamond cup wheels for grinding mineral
materials.
Printed: 08.09.2017 | Doc-Nr: PUB / 5373395 / 000 / 00
Содержание AG 125-7SE
