2.1 Configuration
2.1.1 Selection of serial interface type
The hardware of the converter has jumper J2, to switch between the different
types of serial interfaces. This jumper is accessable if you open the side plate on
the side with connector X1 and X4. This is be done by removing four screws. The
following picture will show the position of the jumper seeing from the side of the
converter. With the help of the table you can chose the right type of interface.
selection
jumper J2
interface
open
RS232
3-4
RS485
1-2, 3-4
RS422
Selection of serial interface type
connector COMBICON
connector male
1
4 3 2
jumper row
Side viewing of PKV 30-IBS with jumper row
X1
X4
1
4 3 2
General device description
6
Copyright * Hilscher Gesellschaft für Systemautomation mbH * Hotline/Support: +49 (0) 6190/9907-99 * De:P30IBS#3E
