hilscher netFIELD Compact X8M, Руководство пользователя

Страница: 54 / 136

Local Device Manager 54/136
Important:
Be careful not to deactivate the eth0 and the eth1 LAN interfaces
by switching them off with the toggle switch. Once you have
deactivated an interface, the connection to your device via this
interface will be lost. If you have deactivated both LAN interfaces,
you will have to perform either a device recovery in order to be able
to reconnect again (see section
Device recovery via
USB [ } page 115]), or you can reactivate the LAN interfaces via the
Console interface with a terminal program like e.g. PuTTY (see
section
Console interface [
}
page 20]).
To query the connectivity states of the LAN interfaces via console,
use:
sudo nmcli dev status
To reactivate an interface (e.g. eth0) via console, use:
sudo nmcli con up ifname eth0
Ø
To change the IP settings, e.g. to set a fixed IP address, click on
Automatic (DHCP) next to IPv4 .
Ê The IPv4 Settings page opens.
Figure 33: IPv4 Settings
netFIELD Compact X8M | User manual
DOC220302UM01EN | Revision 1 | English | 2022-05 | Released | Public © Hilscher 2022