Hillyard TRIDENT T26 SC PLUS, Руководство по эксплуатации и обслуживанию

Страница: 17 / 28

TRANSFER
Selecting the program “TRANSFER”, the control display screen will appear as shown in the figure.
NB : with this working program, both the brush head and squeegee support are in the idle
position (raised off the floor) and the motors switch off with the respective switch-off delays
(even if the drive pedal is not pressed). When the dead man's lever is pressed, only the
traction motor is powered.
NB : on the DS selector, the symbol of the transport program (A) is green.
NB : the grey symbols show working programs that are not active. the green symbols show
working programs that are active.
The icons that may be visible are:
1. HFM symbol. If visible, it indicates that the “HILLYARD FLEET MANAGEMENT” system is active.
2. HDC symbol. If visible, it indicates that the “HILLYARD DOSING CONTROL” system is active.
3. General alarm symbol.
ATTENTION : if visible, stop the machine. To continue working, see “ALARM SCREEN”.
4. Solution tank empty float symbol.
ATTENTION
: if visible, it indicates that the detergent solution in the tank has a reached a level
beyond which the solenoid valve cannot deliver solution onto the brushes, so the tank needs to
be filled up before continuing the work (see “ FILLING THE SOLUTION TANK ”).
5. HEM button.
NB : if the Eco-Mode button (5) is pressed in transfer mode, the "scrubbing with drying"
program is activated in economic mode.
6. Menu button.
7. Zone button.
NB : if the Zone button (8) is pressed in transfer mode, the window for selecting the zone opens
(see “ ZONE PROGRAM BUTTON ”). Once you have selected an area, "scrubbing with drying"
is activated for the area selected.
8. Text indicator.
NB : the text indicator (8) shows which zone program has been selected, or whether the
machine is in transport mode if the word “DRIVE” is visible.
SCRUBBING WITHOUT DRYING
Selecting the program “SCRUBBING WITHOUT DRYING”, the control display screen will appear as
shown in the figure.
NB : with this working program, the pressing of the dead man's lever only brings the brush
head to the work position (in contact with the floor); the squeegee remains in the idle position
(raised from the floor). The brush head solenoid valve and the water system pump are
powered up (only if the detergent solution is other than zero). When the dead man's lever is
pressed, the brush head, solenoid valve, electric pump and traction motor are powered.
NB : on the DS selector, the symbol of the "scrubbing without drying" program (B) is green.
NB : the grey symbols show working programs that are not active. the green symbols show
working programs that are active.
NB : when the dead man's lever is released, the brush head motor stops with the relative delay.
After the “Reset Delay” time, the brush head is taken to its idle position (raised off the floor).
When the dead man's lever is pressed, work will resume with the same working program and
parameters used prior to the stop.
NB : if you reverse while this program is active, the brush head body will remain in contact with
the floor and the motor will continue working, but the solenoid valve will not deliver detergent
solution to the brushes.
The icons that may be visible are:
1. HFM symbol. If visible, it indicates that the “HILLYARD FLEET MANAGEMENT” system is active.
2. HDC symbol. If visible, it indicates that the “HILLYARD DOSING CONTROL” system is active.
3. General alarm symbol.
ATTENTION : if visible, stop the machine. To continue working, see “ALARM SCREEN”.
4. Solution tank empty float symbol.
ATTENTION
: if visible, it indicates that the detergent solution in the tank has a reached a level
beyond which the solenoid valve cannot deliver solution to the brushes, so the tank needs to
be filled up before continuing the work (see “ FILLING THE SOLUTION TANK ”).
5. HEM button.
NB : if the Eco-Mode button (5) is pressed in transfer mode, the "scrubbing with drying"
program is activated in economic mode.
6. Menu button.
7. Zone button.
NB : if the Zone button (8) is pressed in transfer mode, the window for selecting the area opens
(see “ ZONE PROGRAM BUTTON ”). Once you have selected an area, "scrubbing with drying"
is activated for the area selected.
8. Text indicator.
NB : the text indicator (8) shows which zone program has been selected, or whether the
machine is in transport mode if the word “DRIVE” is visible.
ATTENTION: never switch off the machine while the brush head is
in contact with the floor
17
DRIVE
0000.00 100%
6 8
5
7
1 3 2 4
OFFICE
0000.00 100%
6
5
7
8
1 3 2 4