Hillstone SG-6000 X Series Скачать руководство пользователя страница 24

Страница: 24 / 173

LED

Color/Status

Description

LED on

the power

supply

(PS0/PS1)

Green/Always on The power module is working normally.

Orange/Blinking

The fan of power module or voltage output has

failed.

Red/Always on

The power module is inserted but using

power-off protection.

Off

The power module is not correctly inserted.

LED on

the fan

tray

Green/Always on The cooling system is working normally.

Red/Always on

One or more fans have failed.

Off

The fan tray is not fully inserted, or it has a cir-

cuit error.

LNK

(expansion

module)

Green/Always on The link between this port and its peer device

is in normal status.

Off

The link between this port and its peer device

has failed.

ACT

(expansion

module)

Orange/Blinking

The port is sending or receiving data.

Off

No data is transmitted on this port.

PWR

(expansion

module)

Green/Always on The power of expansion module is running nor-

mally.

Orange/Always on The power of expansion module is running

abnormally.

Red/Always on

Power failure so the expansion module is

down.

Off

The expansion module is powered off.

Chapter 1 Product Profile

Содержание SG-6000 X Series














































































































































































Результаты поиска

Содержание SG-6000 X Series

Отзывы:

Бренды по названию

Популярные бренды

Hillstone SG-6000 X Series, Справочное руководство

Результаты поиска

Содержание SG-6000 X Series

Отзывы:

Бренды по названию

Популярные бренды