Hillstone SG-6000 X Series страница 28 Скачать руководство пользователя

Страница: 28 / 173

LED

Color/Status

Description

ALM

Red/Always on

The system is sending alarm(s).

Green/Blinking

The system is waiting.

Orange/Blinking

The system is using a trial license.

Orange/Always on The trial license has expired and there is no

legitimate license installed in the system.

Off

The system is running normally.

Green/Always on Not using HA, the device is the master device.

Green/Blinking

Two devices are in an HA cluster. This device

is working as the master.

Orange/Blinking

Two devices are in an HA cluster. This device

is working as the salve.

Red/Blinking

HA function has failed.

Off

High Availability is disabled.

Green/Always on SD card has been inserted and is in normal

status.

Green/Blinking

SD card is transmitting data.

Red/Always on

SD card has been inserted but cannot be read

or written.

Off

SD card is not in the slot.

LNK

Green/Always on The link between this port and its peer device

is in normal status.

Off

The link between this port and its peer device

has failed.

Chapter 1 Product Profile

Содержание SG-6000 X Series














































































































































































Результаты поиска

Содержание SG-6000 X Series

Отзывы:

Похожие инструкции для SG-6000 X Series

Бренды по названию

Популярные бренды

Hillstone SG-6000 X Series, Справочное руководство

Результаты поиска

Содержание SG-6000 X Series

Отзывы:

Похожие инструкции для SG-6000 X Series

Бренды по названию

Популярные бренды