Hills Supa Fold Duo, Руководство пользователя

Страница: 17 / 24

17
Step 12 – Continued
Line Assembly
12.1 Thread a line tie off cap onto one
end of the PVC line.
12.6 When you reach the tie off end of the
line, thread another line tie off cap.
12.4 Feed the line through the line
sleeves, starting with the rear sleeve on
the other arm.
12.2 Insert the line into the slot of the line tie
off saddle and through the side. Pull through
15cm+ of excess line for tensioning.
12.3 Loop the line around the groove in
the line tie off saddle. Pull tight to prevent
the line from slipping.
12.5 Continue feeding the line through the
line sleeves ensuring all lines are parallel
(refer to
Fig. 23 for the threading pattern
for your product).
Note It is useful to kink or twist the
line when feeding it through the line
sleeves to make assembly easier.