Hills Supa Fold Duo Скачать руководство пользователя страница 2

Страница: 2 / 24

Congratulations

Congratulations on the purchase of your

Hills Supa Fold Folding Frame Clothesline

which will bring you many years of trouble free and efficient drying.

Your Supa

Fold can be either wall or post mounted. If you are planning to post mount,

you will need to purchase a post kit (sold separately).

It’s important that you read this Owner’s Manual thoroughly before installation to benefit
from the design features and enjoy safe use of this product.

Thank you for choosing Hills.

Warning

• Do not allow children or pets to swing on the clothesline or items of laundry.

• Ensure when raising and lowering your clothesline that bystanders

(in particular children) are standing well clear.

• Do not use for any purpose other than to hang and dry washing.

• Do not use your clothesline if parts are worn or damaged.

• Do not allow the frame to lower in an uncontrolled manner as damage

or injury may result.

Patents and Registered Designs apply to this product.

Introduction

Содержание Supa Fold Duo

























Результаты поиска

Содержание Supa Fold Duo

Отзывы:

Похожие инструкции для Supa Fold Duo

Бренды по названию

Популярные бренды

Hills Supa Fold Duo, Руководство пользователя

Результаты поиска

Содержание Supa Fold Duo

Отзывы:

Похожие инструкции для Supa Fold Duo

Бренды по названию

Популярные бренды