16
Line Assembly
Step 11 – Continued
11.7
Insert the line into the slot of the last
line tie off saddle, repeat the tie off.
11.8
Check that the lines are tight and
adjust if necessary.
11.9
Trim off excess PVC line at dotted
line shown above. Make sure line is firmly
pulled back into the line tie off saddle.
11.5
Continue feeding the line through
the holes in the arm ensuring all lines are
parallel (refer to
Fig. 19
for the threading
pattern for your product).
11.6
When you reach the tie off end of the
line, thread another line tie off cap.
11.10
Push PVC line end securely into
saddle.
11.11
Fit line tie off caps over the line tie
off saddles.
