background image

 

I. 

GLOSSARY OF TERMS 

Abort Delay

An option that allows a delay in reporting to the central 
station. 

Authority Level: 

The level of access an individual has when using an alarm 
panel. 

Central Station: 

Location where alarm data is sent during an alarm report

Chime Feature:

 

An option that allows the keypad to sound a ding-dong 
whenever an entry/exit door is opened. 

Codes:

 

Can be either User Codes (relating to a person) or Function 
Codes (a toggle switch to turn specific functions on/off).  

NOTE: A system may have either four (4) digit codes or 
six (6) digit codes, but not a mixture of the two.

 

Duress Code:

 

An option that allows a special code to be sent to the 
central station that indicates the alarm system is being 
operated under duress. 

Forced Arming: 

An option that allows the system to be turned on (ARMED) 
with one or more zones open. A system that is ready to be 
“force armed” will flash the 

ready light

.  

NOTE: Those 

zones that are not ready will not create an alarm.

 

Function Code:

 

A Function Code is either a four (4) or six (6) digit code that 
has been programmed by the installer to operate a device. 

Group Bypass: 

An option that allows the user to bypass multiple zones with 
a single operation. 

Instant/Delay:

 

An option that allows an instant alarm condition for 
Entry/Exit doors, or grants a delay to allow someone to 
enter/exit the building without an alarm or before entering a 
user code to disarm.

 

Master Code:

 

A master arm/disarm code that can program other user 
codes. 

Partitioned System:

  A system divided into multiple areas in which its own user 

or users control each area. 

Perimeter: 

The outer edge of the protected area. 

Quick Arm:

 

An option that allows you to turn on (ARM) the security 
system by pressing either the [

STAY

] or [

EXIT

] key on the 

keypad control (for ARMING only) as programmed by the 
installing company. 

User Code: 

A four (4) or six (6) digit entry used to arm or disarm the 
system. 

Hills LCD Keypad 

Содержание HILLS series





























Отзывы: