Procedure #2
If you do not know the number of the zone you wish to bypass,
use the following steps:
Step 1
Press
r
•
The description for zone 1 will be displayed.
Step 2
Use the
•
–
scroll keys to browse through the custom descriptions
for the zones in this system.
Step 3
To bypass or unbypass a specific zone, press the [
BYPASS
] key while
that zone is displayed.
Step 4
When finished, press the
#
key to return to the code entry screen.
GROUP BYPASS
By pressing the [
BYPASS
] key, followed by the
0
key, then the [
BYPASS
] key
again, all zones that are designated as group bypass zones will be bypassed.
Press the [
BYPASS
] key again to exit group bypassing.
UNBYPASSING
To manually unbypass zones, perform the bypassing procedure on a zone that is
already bypassed.
NOTE:
All zones will automatically be unbypassed each time
the system is disarmed.
EMERGENCY ACTIVATION KEYS
NOTE: You must press and hold these keys for 2 seconds to activate these
functions.
Your system may not be programmed for these activations.
Fire Key
- If programmed, you can activate the Fire alarm by pressing the
Emergency Activation [
Fire
] key for two seconds. If your system is connected to a
monitoring center, an emergency report could be sent to that center. This key
should only be pressed in an emergency situation requiring response by fire
department personnel.
Hills LCD Keypad
9
Содержание HILLS series
Страница 1: ...HILLS Series LCD Code Pad User Manual ...
