Connect to a printer
Note
You can connect the device to a USB printer or you
can add a wireless network printer.
1. Touch
Tools
, and then touch
Printer
. The Available Printers
screen appears.
2. Touch
Plus
. The Add Printer screen appears.
3. If you do not see the printer you want to add, touch
Refresh
. If the printer does not appear, consult the
Instructions for Use.
4. Select the printer to add, and then touch
Save
.
5. To verify the printer is installed correctly, select the printer
on the Available Printer screen. Then touch
Print test page
.
6. To return to the Tools menu, touch the
X
in the upper-left
corner of the screen.
If you have difficulty connecting to a network or
printer, see the Instructions for Use. How-to videos,
and more available at
.
Screen a subject
1. If possible, dim the lights.
2. Turn on
the vision screener. The Home screen appears.
3. Have the subject close his or her eyes for 10 to 15 seconds to
encourage dilation.
4. Touch
and enter the subject information. Date of
Birth or age is required. Enter Date of Birth (or Age) in a valid
format as shown:
• 8 months
• 10 years
• 5/24/1963
5. Prepare to screen the subject:
• Stand approximately 3 feet (1 meter) from the subject
• Hold the vision screener so that the front is on a level with
the subject’s eye
• Keep the vision screener steady
6. Touch
Go
.
The screening begins immediately. The vision screener
emits the sound of chirping birds. This sound is intended to
focus the subject’s attention on the device.
The Subject Results screen appears at the end of the screening
process. Completed exams are saved automatically. A PDF with
exam results is generated. The Troubleshooting section of the
Instructions for Use provides additional suggestions to ensure a
successful screening.
3 feet
1 meter
Connect to a wireless network
Note
Your system administrator can supply you with the
case-sensitive information needed to access the network.
1. Touch
Tools
, and then touch
Network
.
2. To connect a device to the network, add the network name,
security type, and password.
3. Touch
OK
to save your changes and return to the previous
screen.
4. To verify the network connection status, check the status
bar at the top of the screen.
Icon
Meaning
You have successfully connected the device
to your wireless network. The vertical bars
indicate the strength of the connection.
The device is not connected to the
network. For tips on connecting to the
network, refer to Troubleshooting.
5. To return to the Tools menu, touch the
X
in the upper-left
corner of the screen.
2
Spot® Vision Screener Quick Reference
