187692(10) - EN - P280 Mattress Instructions for Use
Page 29
M
oving the Device
Transferring the Device from One Bed to Another
Never leave the patient on the device during the transfer.
1. Make sure that the bed frame brakes are applied to prevent any
accidental movements.
2. To prepare the device for transfer, refer to steps 3 through 5 of
Tranport Mode procedure page 27.
3. If necessary, detach the Velcro® straps securing the power cord to the bed
frame.
4. Undo the two straps securing the mattress to the bed (at the head and foot
ends).
5. Place the control unit on the mattress to prevent it from being damaged.
6. Transfer the mattress on to the other bed.
In the case of
P280 Overlay
model, if there is no mattress on the other bed,
transfer the base mattress with the device.
7. To install the mattress on the other bed, refer to steps 2 through 13 of the
Installation procedure (page 20).
