Hillphoenix CO2One Скачать руководство пользователя страница 14

Страница: 14 / 64

Hillphoenix Refrigeration Systems

One Condensing Unit

Hillphoenix Refrigeration Systems

One Condensing Unit

Section 1: Ov

vie

Personal Protection Equipment and Rules of Conduct

For each of the procedures described in these instructions, mandatory protective measures and safety guidelines

are specified for the safety of any personnel operating the equipment.

Editorial Conventions

The layout of these instructions allows easy readability of the contents with the use of bulleted and numbered
lists, as indicated below:

•

This symbol identifies a generic bulleted list or list in points consisting of simple actions (the order

in which the actions are presented is not mandatory but recommended).

A numbered explanatory list of a complex procedure is identified (the order in which the actions

are presented is mandatory to correctly and safely perform the work in question).

Italic text

Italicized text is used, in particular, for:
•

Cross-references; the

cross references used in these instructions are expressed in the

following form: “Paragraph/Table” with the number and, in general, the specification “of the

section” with the number and name of that section (when it is not specified it is implied that

the paragraph or the table belong to the current section).

•

Technical and specialized terms, the first time they appear in the text.

Bold text

Bold text is used to highlight words, phrases, or parts of the procedure.

Personal Protective Equipment (PPE)

This paragraph indicates the graphic symbols used in these instructions to indicate the need to use certain PPE.

SYMBOL

DESCRIPTION

Indicates the need to use head protectors suitable for performing the described procedure.

Indicates the need to use protective gloves suitable for performing the described procedure

(possibly of the dielectrics type for work performed on the electrical system).

Indicates the need to use protective clothing suitable for performing the described procedure.

Indicates the need to use safety shoes suitable for performing the described procedure.

Indicates the need to use protective goggles to perform the described procedure.

Содержание CO2One

































































Результаты поиска

Содержание CO2One

Отзывы:

Похожие инструкции для CO2One

Бренды по названию

Популярные бренды

Hillphoenix CO2One, Руководство пользователя

Результаты поиска

Содержание CO2One

Отзывы:

Похожие инструкции для CO2One

Бренды по названию

Популярные бренды