Hillenbrand Hill-Rom Advanta Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 54

background image

Caregiver Controls

27

NOTE:

If there is a list of bed items, you may want to update the list at this time.

•

After you have changed all the desired items on the bed, press and release the Change Items key. The scale
will resume displaying the patient’s weight.

Changing the Unit of Measure

The scale can display the patient’s weight in either pounds or kilograms.

Press and release the LBS/KGS key on the scale control panel. The displayed weight changes from one
unit of measurement to the other.

Manual Weight Adjustment

You can adjust the displayed weight of the scale manually by using the Plus + and Minus - keys on the
scale control panel.

•

To adjust the weight up, press and hold the Plus + key on the scale control panel. Release the key
when the desired weight is displayed.

•

To adjust the weight down, press and hold the Minus - key on the scale control panel. Release the
key when the desired weight is displayed.

Indicators

The Advanta™ Bed is equipped with a variety of safety and information indicators. Using these indicators can enhance
patient safety and comfort.

Head Angle Indicator

The head angle indicator shows the angle of head elevation from -15° to 60° from the
horizontal. Head angle indicators are located on the caregiver sides of the head end
siderails. To adjust the head section of the Advanta™ Bed to a specific angle, observe the
head angle indicator while adjusting the Head Up/Head Down controls. Raise or lower the
head section until the indicator ball rests at the appropriate position.

Trendelenburg Angle Indicator

The Trendelenburg (and Reverse Trendelenburg) angle indicator is located on the footboard
control panel, and shows the angle of Trendelenburg (or Reverse Trendelenburg) in degrees
and inches.

Head Angle Indicator

Trendelenburg

Angle Indicator

«
...
29
30
31
32
33
...
»

Содержание Hill-Rom Advanta























































Отзывы:

Нет отзывов

Похожие инструкции для Hill-Rom Advanta

Бренд: Fein Страницы: 248

Бренд: ZF Страницы: 30

Бренд: Raymarine Страницы: 111

Бренд: FJC Страницы: 2

DVCPRO P2 Series

Бренд: Panasonic Страницы: 32

Бренд: Parr Instrument Страницы: 24

Бренд: JBL Страницы: 15

Бренд: 1010music Страницы: 2

Бренд: 1010music Страницы: 4

Бренд: Bang & Olufsen Страницы: 2

DISHSTAR ADA-SEER

Бренд: Jackson Страницы: 2

Бренд: Labnet Страницы: 12

Accublock D1301

Бренд: Labnet Страницы: 13

Бренд: M-system Страницы: 5

Бренд: MA Страницы: 2

Бренд: SandenVendo Страницы: 19

1C63 Triton Low Profile

Бренд: Otto Bock Страницы: 196

Бренд: GARDASOFT Страницы: 66

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды