Hillenbrand Hill-Rom Advanta, Руководство пользователя

Страница: 17 / 54

Caregiver Controls
13
When the green indicator light on Night Light key is on, the function is active.
Sensor Control (Night Light)
The night light Sensor Control is located at the foot end of
the bed frame, on the right-hand side. This control allows
you to set the level of light at which the night light will come
on. To increase the sensitivity, that is to turn the night light
on when the room is less dark, turn the control
counterclockwise. To decrease the sensitivity, that is to turn
the night light on when the room is darker, turn the control
clockwise.
Location: At the foot end of the bed frame, on the
right-hand side.
To Activate: Insert a small screwdriver into the hole in
the center of the Sensor Control. Turn the Sensor Control clockwise or counterclockwise, as desired.
Lockout Controls
Lockout controls lock certain articulating functions on the bed. This may be done to help
ensure patient safety. When a lockout is activated, both the patient and caregiver controls for
that function are disabled.
NOTE:
Activating the lockout functions does not affect the operation of the emergency CPR Release.
NOTE:
The All Motors lockout disables all bed articulation controls. No bed movement can occur,
except for the emergency CPR Release.
NOTE:
When any lockout is activated, the yellow Lockout indicators on the caregiver siderail control
panels illuminate.
Head Section Lockout
When activated, the Siderail Head lockout control disables the Head Up and Head Down
movement of the bed.
Location: Footboard control panel.
To Activate: Press and release the Siderail Head lockout key.
To Deactivate: Press and release the Siderail Head lockout key.
NOTE:
When the Siderail Head function is locked out, the green light on the Siderail Head lockout key illuminates.
Night Light Key
Night Light Sensor Control
Lockout Controls
Siderail Lockout
Indicator
Lockout Controls