Hillenbrand Hill-Rom Advanta, Руководство пользователя

Страница: 13 / 54

Caregiver Controls
9
Neutral
In the neutral position, the swivels and casters move freely, allowing the bed to
be moved in any direction. This function is used for exact positioning of the bed
and maneuvering in confined areas
Location: At each caster on the bed.
To Activate: At any wheel, push either the orange or green pedal down
slightly until the pedal is flat (in a horizontal position).
CAUTION:
Unless the bed is about to be moved, the brakes should always be set
and locked.
NOTE:
When the brakes are not locked, the Brake Not Set indicators flash
continuously.
Bed Functions
The Advanta™ Bed is equipped with standard bed function controls on the caregiver side of each head end siderail,
and at the footboard control panel. These controls operate all of the motor functions of the bed.
Bed Up/Bed Down (Hi-Lo)
The Bed Up/Bed Down controls allow you to raise or lower the bed 13.25" (33.65 cm). The low position is for
general use and to assist with patient egress, while the high position is used for patient examinations.
Location: Outside left siderail, outside right siderail, footboard control panel.
To Activate: Press and hold the Bed Up key to raise the bed.
Press and hold the Bed Down key to lower the bed.
WARNING:
Leave the bed in the low position when the patient is unattended. This can reduce the possibility of
patient falls and the severity of any resultant injuries.
NOTE:
The Bed Not Down indicator illuminates when the bed is not in the lowest position.
Central Brake and Steer—Neutral